A guide to Gateway frames and dividers
From recessed to surface-mounted applications, our Gateway entrance matting fits seamlessly with all well depths and contours effortlessly to the subfloor. There's also low profile options for integration with luxury vinyl tiles, carpet and ceramic.
Recessed installations
Our frames and dividers for recessed installations are purpose designed to provide level and smooth transitions between your entrance mat and the surrounding environment. Simple to install, they're available in range of finishes and colours.
Surface-mounted installations
Our frames and dividers for surface-mounted installations can be used for both fixed-in-place and moveable entrance mats and walkways. We offer two types of edges (PVC and aluminum), as well as PVC clips and joining strips for larger installs.
Have a question? Send our team a message – they'll be delighted to help
Secures and caps left-to-right edges of 14mm and 10.5mm (low profile) matting. Made from aluminum. Available in dark grey and black.
An invisible divider for front-to-back installations of 14mm and 10.5mm (low profile) matting. Made from aluminum with matching PVC insert.
Secures and caps left-to-right edges of 10.5mm (low profile) matting in conjunction with ceramic tiles. Made from aluminium.
A divider or frame for front-to-back installations of 14mm and 10.5mm (low profile) matting. Made from aluminium. Available in dark grey and black.
Divides sections left-to-right on 14mm large installations – this makes it easier to lift and clean. Made from aluminium. Available in dark grey and black.
Divides sections left-to-right on 14mm large installations – this makes it easier to lift and clean. Made from aluminium.
Secures and caps left-to-right edges of 14mm matting when installed against a wall. Made from rigid PVC. Available in dark grey and black.
For circular door and non-rectangular installations of 14mm matting. Formable aluminium trim.
Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33').
Supplied in rolls of 10.1m (33') length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')
Supplied in rolls of 10.1m (33') length with cold welding paste. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')
Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminum and powder coated yellow. Size: 14mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")
Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")
For joining sections of matting together side-to-side. Supplied in packs of 10. Comes in black. Size: 14mm
For joining sections of low profile matting together side-to-side. Supplied in packs of 10. Comes in black. Size: 10mm
Supplied in rolls of 60m (197") length. Supplied in rolls of xx.xm (xx’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 6.5mm x 30mm x 60m (1/4" x 1" x 197')
Can be welded to join rolls end-to-end or side-to-side when doing large installations. Comes in black. Size: 3.5mm x 3.6m (1/8" x 11'9")
Aluminum frames come in a natural anodised finish. For design elegance and colour continuity, the U, R and T frames are all available in dark grey and black. The J frame, in rigid PVC, is also available in dark grey and black.
Installation videos
To give you total flexibility, every product in our Gateway entrance matting range can be installed as either recessed or surface mounted. Check out some of our installation videos below or see all our videos here.
Subscribe to our
Newsletter
Sign up to our newsletter for updates, news and events